What is a pair and set clause?
A pair and set clause is the part of a home insurance policy that deals with partial loss of a matching group. It tells you whether the insurer pays only for the damaged piece, part of the cost of the undamaged pieces, or the full drop in value.
The issue is simple. Lose one earring of a pair and the other is worth far less on its own. Damage one chair from a set of twelve and the set may lose value even after the chair is repaired.
Without specific wording, the starting point is usually the cost of the item actually lost or damaged. The pair and set clause then either confirms that limit or extends it.
How do insurers word pairs and sets cover?
There is no single market wording for pairs and sets cover. The two UK policy wordings below show how far apart the approaches can be.
A standard home policy. One standard home wording pays 50% of the cost of replacing undamaged items that form part of a pair, set, collection or suite. The same 50% basis applies in both its buildings and contents sections. You receive the cost of the damaged item plus half the replacement cost of the undamaged companion pieces.
A high-value home policy. A typical high-value wording takes a different line. For contents, it pays to repair or replace the damaged component parts. If that is not possible, it pays for the repair, alteration or replacement of the whole pair, set or suite.
For art and antiques, the same wording goes further. Where an item is worth more because it forms part of a pair or set, the payment takes account of the loss in overall value. If you surrender the undamaged pieces, it pays the full replacement cost of the pair or set, within the policy limits.
These are examples only. Other insurers use different language and limits, so it's important to read your own policy.
Pairs and sets versus matching items: what is the difference?
Pairs and sets cover deals with items valued as a group, such as earrings or a set of chairs. Matching items cover deals with fixtures and finishes that cannot be matched after a repair, such as a run of kitchen units or a bathroom suite.
Take one standard home wording. Its buildings section covers items of "a matching or uniform design, nature or colour, including carpets." The words "including carpets" appear only in the buildings section, not the contents section. The same wording will not pay for undamaged flooring in adjacent rooms.
In the high-value wording, the buildings section pays to repair or replace damaged component parts. If that is not possible, it pays for "a replacement pair, set or suite of similar quality and specification." The insurer may then take ownership of the damaged and undamaged parts.
| Example | Usually treated as | What can go wrong |
|---|---|---|
| Pair of diamond earrings | Pair (personal valuables) | Policy pays for one earring only, though the survivor has lost most of its value |
| Pair of cufflinks | Pair (personal valuables) | As above, often with a single-article limit too |
| Set of twelve dining chairs | Set (contents or antiques) | Repair of one chair is paid, but the set's reduced value is not |
| Pair of Chinese vases | Pair (art and antiques) | Market value of a single vase is far below half the pair |
| Fitted kitchen units | Matching items (buildings) | Damaged doors are replaced, but no exact match exists for the rest |
| Bathroom suite | Matching items (buildings) | Cracked basin cannot be matched, so the suite looks mismatched |
| Fitted carpet across rooms | Matching items (buildings, in some wordings) | Only the damaged room is relaid |
Why do pairs and sets matter so much for valuables?
Because value often sits in the completeness of the set. A pair of matched antique vases, a parure of jewellery or a set of Georgian silver can be worth far more together than the separate pieces.
Illustrative example: A pair of vases is valued at £40,000 as a pair. One is broken beyond repair, and a single vase is valued at £12,000.
| Settlement basis | What is paid (approximately) |
|---|---|
| Damaged item only | £12,000 for the broken vase |
| Damaged item plus 50% of undamaged item | £12,000 + £6,000 = £18,000 |
| Loss in value of the pair | £40,000 − £12,000 = £28,000 |
| Full value on surrender of the survivor | £40,000, and the insurer takes the surviving vase |
The figures are round and for illustration only. Actual settlement depends on the wording, the valuation and any limits.
How do high-value home policies usually improve pairs and sets cover?
High-value wordings usually pay for the drop in value of the set, not just the lost object. Common improvements include:
- Loss in value. Payment for the reduction in the overall value of the pair or set.
- Surrender option. The insurer pays the full value of the set and takes the remaining items.
- Replacement of the whole set. Where a component cannot be repaired or matched.
- Specified items. Individually listed pieces settled by reference to the scheduled valuation.
Not every high-value policy includes all of these, and limits apply. Some wordings cap any one unspecified item, pair or set. One high-value wording, for example, sets that cap at £50,000 for art and antiques and £25,000 for personal valuables.
Our overview of high-value home insurance explains how these policies differ from standard home cover.
How should a pair or set be valued and scheduled?
Value the set as a set. The valuation should describe each component and state the value of the pair or set as a whole. That lets the insurer see what the loss in value would be.
If the set is above the policy's single-article or unspecified limit, it usually needs to be individually specified. Our guide to valuing art, jewellery and collections for insurance explains what a good valuation includes.
Keep photographs of each piece and of the set together. Record makers' marks, hallmarks, dimensions and any certificates.
What should I check in my policy?
Start with the definitions and the basis of settlement, then check the limits. These questions cover most of it:
| Question | Why it matters |
|---|---|
| Does the policy pay for loss in value, or only for the damaged item? | This is the biggest difference between wordings |
| Is there a percentage cap on undamaged items? | A 50% basis can leave a large shortfall on valuable sets |
| Is there a surrender option? | It can turn a partial loss into a full settlement |
| What is the limit for any one item, pair or set? | Valuable sets can exceed it easily |
| Are pairs and sets valued as a unit on the schedule? | Specifying each piece separately can understate the set's value |
| Is there a matching items clause in the buildings section? | Kitchens, bathrooms and flooring are frequent sources of dispute |
| Does the clause apply to all sections? | Wording may differ between buildings, contents and art |
If your collection has grown, recheck the set values too. Under-valued sets feed into wider underinsurance in high-value homes. Owners of larger properties can also speak to our high net worth home insurance team.
What to have ready for a quote
- A list of pairs, sets and suites, with the value of each as a set.
- Recent valuations, since insurers usually expect values to be kept up to date.
- Photographs of each piece and of the set together.
- Makers' marks, hallmarks, certificates and purchase receipts.
- An estimate of total contents value, and your other high-value items.
- Where the items are kept, and whether any are lent, displayed or taken abroad.
- Alarm, safe and other security details at home.
- Your claims history for the last five years.
- Your current policy schedule and wording, so we can compare the settlement basis.





